Publikationen

Publikationen?

Das Fab Lab Siegen ist ein Reallabor (wikipedia.de) des Lehrstuhls CSCW (Computer Supported Collaborative Work) unter der Leitung vom Prof. Dr. Volkmar Pipek an der Universität Siegen. Es dient für diesen und andere Lehrstühle und Forschungsprojekte als Forschungsinfrastruktur. Forschende beforschen das Lab und forschen im Lab. Im Folgenden eine Auflistung von wissenschaftlichen Veröffentlichungen zum Thema Fab Lab(s).

2023

  • Frohn-Sörensen, P., Mouratidis, M. & Engel, B. (2023)Design of non-assembly joints incorporating randomness generated through a publicly accessible 3D print farm

    IN Procedia CIRP, Vol. 120, Pages: 129–134 doi:10.1016/j.procir.2023.08.024
    [BibTeX] [Abstract] [Download PDF]
    Traditionally, technical hinge joints are made of multiple parts, which need to be assembled. Additive manufacturing (AM) provides the option to overcome these assembly steps since movable mechanisms become manufacturable in a streamlined manufacturing route. The feasibility for such so-called “print-in-place” approaches has been proven and punctual design recommendations are available in additive manufacturing community knowledge. Still, a generalized assessment of the influencing parameters is absent because the layout of the gap of a joint highly depends on the AM boundary conditions. This study considers manufacturing simple hinge joints by the method of fused filament fabrication (FFF) on commercially available 3D printers. In order to generate representative scatter, the manufacturing jobs of the specimens are placed on a 3D print farm in a university fab lab. The machines are utilized and maintained by a public community, which also utilizes different materials suppliers in a randomized manner. Series of print-in-place joints are printed with statistically relevant repetitions under variation of the hinge joint gap, print orientation and AM layer height. After manufacture, the joints are tested to provide statistical information on force necessary for motion. The results indicate that with a reduction of gap width, the forces necessary to initially release and move the joints begins to rise until complete fusion of bushing and hinge axis. If the hinge axis is aligned with the Z-axis of the 3D printing process tighter critical clearances become manufacturable than with a hinge alignment in the XY-plane of the 3D printer. Moreover, reduced scatter of the results is obtained in the Z-axis. As for the layer height, it is seen that layer heights of 0.1 mm might lead to increased release forces while the largest adjusted layer height of 0.3 mm led to increased forces during the hinges’ motion.
    @article{frohn-sorensen_design_2023,
series = {56th {CIRP} {International} {Conference} on {Manufacturing} {Systems} 2023},
title = {Design of non-assembly joints incorporating randomness generated through a publicly accessible {3D} print farm},
volume = {120},
issn = {2212-8271},
url = {https://www.sciencedirect.com/science/article/pii/S2212827123006959},
doi = {10.1016/j.procir.2023.08.024},
abstract = {Traditionally, technical hinge joints are made of multiple parts, which need to be assembled. Additive manufacturing (AM) provides the option to overcome these assembly steps since movable mechanisms become manufacturable in a streamlined manufacturing route. The feasibility for such so-called “print-in-place” approaches has been proven and punctual design recommendations are available in additive manufacturing community knowledge. Still, a generalized assessment of the influencing parameters is absent because the layout of the gap of a joint highly depends on the AM boundary conditions. This study considers manufacturing simple hinge joints by the method of fused filament fabrication (FFF) on commercially available 3D printers. In order to generate representative scatter, the manufacturing jobs of the specimens are placed on a 3D print farm in a university fab lab. The machines are utilized and maintained by a public community, which also utilizes different materials suppliers in a randomized manner. Series of print-in-place joints are printed with statistically relevant repetitions under variation of the hinge joint gap, print orientation and AM layer height. After manufacture, the joints are tested to provide statistical information on force necessary for motion. The results indicate that with a reduction of gap width, the forces necessary to initially release and move the joints begins to rise until complete fusion of bushing and hinge axis. If the hinge axis is aligned with the Z-axis of the 3D printing process tighter critical clearances become manufacturable than with a hinge alignment in the XY-plane of the 3D printer. Moreover, reduced scatter of the results is obtained in the Z-axis. As for the layer height, it is seen that layer heights of 0.1 mm might lead to increased release forces while the largest adjusted layer height of 0.3 mm led to increased forces during the hinges’ motion.},
urldate = {2024-01-18},
journal = {Procedia CIRP},
author = {Frohn-Sörensen, Peter and Mouratidis, Marios and Engel, Bernd},
month = jan,
year = {2023},
keywords = {fablab, additive manufacturing, FFF, hinge joint, non-assembly, PLA},
pages = {129--134},
}

  • Schreiber, F., Frohn-Sörensen, P., Mouratidis, M., Engel, B. & Manns, M. (2023)Case Study on the Additive Manufacturability of Printed Soft-Robotic Bending Actuators

    IN Procedia CIRP, Vol. 120, Pages: 720–725 doi:10.1016/j.procir.2023.09.065
    [BibTeX] [Abstract] [Download PDF]
    In order to flexibly handle products with varying shapes and materials, soft robotic pneumatic network actuators (pneunets) have been proposed due to their compliant behavior. Pneunets are manufactured with manual casting or with additive manufacturing (AM). In this work, the four AM technologies fused filament fabrication (FFF), stereolithography (SLA), selective laser sintering (SLS) and polyjetting (PJ) are compared for manufacturing pneunets. Results are analyzed regarding manufacturability, deflection behavior and airtightness. SLS and FFF show best results and least manufacturing restrictions for thermoplastic polyurethane pneunets. SLA and PJ lead to manufacturing specific deficits and critical material failures during pneunet operation.
    @article{schreiber_case_2023,
series = {56th {CIRP} {International} {Conference} on {Manufacturing} {Systems} 2023},
title = {Case {Study} on the {Additive} {Manufacturability} of {Printed} {Soft}-{Robotic} {Bending} {Actuators}},
volume = {120},
issn = {2212-8271},
url = {https://www.sciencedirect.com/science/article/pii/S2212827123007977},
doi = {10.1016/j.procir.2023.09.065},
abstract = {In order to flexibly handle products with varying shapes and materials, soft robotic pneumatic network actuators (pneunets) have been proposed due to their compliant behavior. Pneunets are manufactured with manual casting or with additive manufacturing (AM). In this work, the four AM technologies fused filament fabrication (FFF), stereolithography (SLA), selective laser sintering (SLS) and polyjetting (PJ) are compared for manufacturing pneunets. Results are analyzed regarding manufacturability, deflection behavior and airtightness. SLS and FFF show best results and least manufacturing restrictions for thermoplastic polyurethane pneunets. SLA and PJ lead to manufacturing specific deficits and critical material failures during pneunet operation.},
urldate = {2024-01-18},
journal = {Procedia CIRP},
author = {Schreiber, Florian and Frohn-Sörensen, Peter and Mouratidis, Marios and Engel, Bernd and Manns, Martin},
month = jan,
year = {2023},
keywords = {fablab, Additive manufacturing, manufacturing flexibility, pneunets, production automation, soft robotic},
pages = {720--725},
}

2020

  • Jasche, F. & Ludwig, T. (2020)PrintARface: Supporting the Exploration of Cyber-Physical Systems through Augmented Reality

    New York, NY, USA, Publisher: Association for Computing Machinery doi:10.1145/3419249.3420162
    [BibTeX] [Abstract] [Download PDF]
    The increasing functionalities and close integration of hardware and software of modern cyber-physical systems present users with distinct challenges in applying and, especially, appropriating those systems within their practices. Existing approaches to design for appropriation and the development of sociable technologies that might support users seeking to understand how to make such technologies work in a specific practice, often lack appropriate user interfaces to explain the internal and environment-related behavior of a technology. By taking the example of 3D printing, we examine how augmented reality can be used as a novel human–machine interface to ease the way for hardware-related appropriation support. Within this paper we designed, implemented and evaluated a prototype called PrintARface, that extends a physical 3D printer by incorporating virtual components. Reflections upon the evaluation of our prototype are used to provide insights that foster the development of hardware-related appropriation support by encompassing augmented reality-based human–machine interfaces.
    @inproceedings{jasche_printarface_2020,
address = {New York, NY, USA},
series = {{NordiCHI} '20},
title = {{PrintARface}: {Supporting} the {Exploration} of {Cyber}-{Physical} {Systems} through {Augmented} {Reality}},
isbn = {978-1-4503-7579-5},
url = {https://doi.org/10.1145/3419249.3420162},
doi = {10.1145/3419249.3420162},
abstract = {The increasing functionalities and close integration of hardware and software of modern cyber-physical systems present users with distinct challenges in applying and, especially, appropriating those systems within their practices. Existing approaches to design for appropriation and the development of sociable technologies that might support users seeking to understand how to make such technologies work in a specific practice, often lack appropriate user interfaces to explain the internal and environment-related behavior of a technology. By taking the example of 3D printing, we examine how augmented reality can be used as a novel human–machine interface to ease the way for hardware-related appropriation support. Within this paper we designed, implemented and evaluated a prototype called PrintARface, that extends a physical 3D printer by incorporating virtual components. Reflections upon the evaluation of our prototype are used to provide insights that foster the development of hardware-related appropriation support by encompassing augmented reality-based human–machine interfaces.},
booktitle = {Proceedings of the 11th {Nordic} {Conference} on {Human}-{Computer} {Interaction}: {Shaping} {Experiences}, {Shaping} {Society}},
publisher = {Association for Computing Machinery},
author = {Jasche, Florian and Ludwig, Thomas},
year = {2020},
keywords = {fablab, appropriation, augmented reality, sociable technologies, 3D printing, Human–machine interface},
}

2019

  • Jasche, F. & Ludwig, T. (2019)Appropriating 3D Printers in Augmented Reality

    New York, NY, USA, Publisher: ACM, Pages: 901–903 doi:10.1145/3340764.3345377
    [BibTeX] [Abstract] [Download PDF]
    Digital fabrication technologies, such as 3D printers, are receiving more and more attention, not only from professionals but also from hobbyists. However, even though people have easier access to these devices, 3D printers remain a black box for many users. To support the appropriation of 3D printers, this demonstration presents a system which extends a physical printer to include virtual components using augmented reality (AR). With these components, we try to explain how the printer works and allow the user to operate the printer through an AR application. We extend existing software with a custom solution to create a unique user interface and user experience. Our user interface provides a new way of inspecting models in AR before they are printed.
    @inproceedings{jasche_appropriating_2019-1,
address = {New York, NY, USA},
title = {Appropriating {3D} {Printers} in {Augmented} {Reality}},
isbn = {978-1-4503-7198-8},
url = {http://dl.acm.org/citation.cfm?doid=3340764.3345377 https://dl.acm.org/doi/10.1145/3340764.3345377},
doi = {10.1145/3340764.3345377},
abstract = {Digital fabrication technologies, such as 3D printers, are receiving more and more attention, not only from professionals but also from hobbyists. However, even though people have easier access to these devices, 3D printers remain a black box for many users. To support the appropriation of 3D printers, this demonstration presents a system which extends a physical printer to include virtual components using augmented reality (AR). With these components, we try to explain how the printer works and allow the user to operate the printer through an AR application. We extend existing software with a custom solution to create a unique user interface and user experience. Our user interface provides a new way of inspecting models in AR before they are printed.},
booktitle = {Proceedings of {Mensch} und {Computer} 2019},
publisher = {ACM},
author = {Jasche, Florian and Ludwig, Thomas},
month = sep,
year = {2019},
keywords = {fablab, Human-Computer-Interaction, Appropriation, Augmented Reality, 3D Printer, Sociable Technologies},
pages = {901--903},
}

  • Ludwig, T., Döll, M. & Kotthaus, C. (2019)“The Printer is Telling Me about Itself”

    New York, NY, USA, Publisher: ACM, Pages: 331–344 doi:10.1145/3322276.3322342
    [BibTeX] [Download PDF] 
    @inproceedings{ludwig_printer_2019-1,
address = {New York, NY, USA},
title = {"{The} {Printer} is {Telling} {Me} about {Itself}"},
isbn = {978-1-4503-5850-7},
url = {http://dl.acm.org/citation.cfm?doid=3322276.3322342 https://dl.acm.org/doi/10.1145/3322276.3322342},
doi = {10.1145/3322276.3322342},
booktitle = {Proceedings of the 2019 on {Designing} {Interactive} {Systems} {Conference}},
publisher = {ACM},
author = {Ludwig, Thomas and Döll, Michael and Kotthaus, Christoph},
month = jun,
year = {2019},
keywords = {fablab},
pages = {331--344},
}

  • Ahmadi, M., Weibert, A., Wenzelmann, V., Aal, K., Gäckle, K., Wulf, V. & Marsden, N. (2019)Designing for Openness in Making: Lessons Learned from a Digital Project Week

    New York, NY, USA, Publisher: ACM, Pages: 160–171 doi:10.1145/3328320.3328376
    [BibTeX] [Download PDF] 
    @inproceedings{ahmadi_designing_2019,
address = {New York, NY, USA},
series = {C\&\#38;{T} '19},
title = {Designing for {Openness} in {Making}: {Lessons} {Learned} from a {Digital} {Project} {Week}},
isbn = {978-1-4503-7162-9},
url = {http://doi.acm.org/10.1145/3328320.3328376},
doi = {10.1145/3328320.3328376},
booktitle = {Proceedings of the 9th {International} {Conference} on {Communities} \& {Technologies} - {Transforming} {Communities}},
publisher = {ACM},
author = {Ahmadi, Michael and Weibert, Anne and Wenzelmann, Victoria and Aal, Konstantin and Gäckle, Kristian and Wulf, Volker and Marsden, Nicola},
year = {2019},
keywords = {FabLab, Community, Diversity, DIY, Gender, Hacking, Maker Culture, Makerspace, Making, Openness},
pages = {160--171},
}

  • Stickel, O., Stilz, M., Brocker, A., Borchers, J. & Pipek, V. (2019)Fab:UNIverse – Makerspaces, Fab Labs and Lab Managers in Academia

    New York, NY, USA, Publisher: ACM, Pages: 19:1–19:2 doi:10.1145/3335055.3335074
    [BibTeX] [Download PDF] 
    @inproceedings{stickel_fabuniverse_2019,
address = {New York, NY, USA},
series = {{FabLearn} {Europe} '19},
title = {Fab:{UNIverse} - {Makerspaces}, {Fab} {Labs} and {Lab} {Managers} in {Academia}},
isbn = {978-1-4503-6266-5},
url = {http://doi.acm.org/10.1145/3335055.3335074},
doi = {10.1145/3335055.3335074},
booktitle = {Proceedings of the {FabLearn} {Europe} 2019 {Conference}},
publisher = {ACM},
author = {Stickel, Oliver and Stilz, Melanie and Brocker, Anke and Borchers, Jan and Pipek, Volkmar},
year = {2019},
keywords = {FabLab, Makerspaces, Digital Fabrication, Education, University},
pages = {19:1--19:2},
}

2018

  • Ludwig, T., Kotthaus, C. & Döll, M. (2018)Nutzung von Projection Mapping zur Unterstützung von Hardware-Aneignung

    IN Mensch und Computer 2018-Tagungsband doi:10.18420/muc2018-mci-0256
    [BibTeX] 
    @article{ludwig_nutzung_2018-1,
title = {Nutzung von {Projection} {Mapping} zur {Unterstützung} von {Hardware}-{Aneignung}},
doi = {10.18420/muc2018-mci-0256},
number = {September 2018},
journal = {Mensch und Computer 2018-Tagungsband},
author = {Ludwig, Thomas and Kotthaus, Christoph and Döll, Michael},
year = {2018},
note = {Publisher: Mensch und Computer 2017},
keywords = {fablab},
}

2017

  • Ludwig, T., Boden, A. & Pipek, V. (2017)3D Printers as Sociable Technologies

    IN ACM Transactions on Computer-Human Interaction, Vol. 24, Pages: 1–28 doi:10.1145/3007205
    [BibTeX] [Abstract] [Download PDF]
    3D printers have become continuously more present and are a perspicuous example of how technologies are becoming more complex and ubiquitous. To some extent, the emerging technological infrastructures around them exemplify ways how digitalization will change production machines and lines, in general, in the Internet of Things (IoT). From an End-User Development perspective, the main question is how users can be supported in managing those complex digital production lines. To reach a better understanding, we carefully analyzed 3D printers as an example of highly digitalized production machines with regard to the creative activities of their users that help them to make these machines work for their practices. In our study of appropriation processes, we are concerned with situational and social aspects of the configuration and practice challenges associated with making digitalization work and how IoT technologies can support these collaborative appropriation activities of end users by making these machines more “sociable.” We therefore conceptualize the idea of “Sociable Technologies” and implement a prototype that provides hardware-integrated affordances for communicating and documenting practices of usage. Based on the findings of our evaluation, we derive lessons learnt when aiming at making complex technologies more usable.
    @article{ludwig_3d_2017,
title = {{3D} {Printers} as {Sociable} {Technologies}},
volume = {24},
issn = {1073-0516},
url = {https://dl.acm.org/doi/10.1145/3007205},
doi = {10.1145/3007205},
abstract = {3D printers have become continuously more present and are a perspicuous example of how technologies are becoming more complex and ubiquitous. To some extent, the emerging technological infrastructures around them exemplify ways how digitalization will change production machines and lines, in general, in the Internet of Things (IoT). From an End-User Development perspective, the main question is how users can be supported in managing those complex digital production lines. To reach a better understanding, we carefully analyzed 3D printers as an example of highly digitalized production machines with regard to the creative activities of their users that help them to make these machines work for their practices. In our study of appropriation processes, we are concerned with situational and social aspects of the configuration and practice challenges associated with making digitalization work and how IoT technologies can support these collaborative appropriation activities of end users by making these machines more “sociable.” We therefore conceptualize the idea of “Sociable Technologies” and implement a prototype that provides hardware-integrated affordances for communicating and documenting practices of usage. Based on the findings of our evaluation, we derive lessons learnt when aiming at making complex technologies more usable.},
number = {2},
journal = {ACM Transactions on Computer-Human Interaction},
author = {Ludwig, Thomas and Boden, Alexander and Pipek, Volkmar},
month = may,
year = {2017},
keywords = {A-Paper, CSCW, fablab},
pages = {1--28},
}

  • Stickel, O., Aal, K., Schorch, M., Pipek, V., Hornung, D., Boden, A. & Wulf, V. (2017)Computerclubs und Flüchtlingslager – Ein Diskussionsbeitrag zur Forschungs- und Bildungsarbeit aus praxistheoretischer Perspektive

    Wien doi:https://doi.org/10.14361/9783839433508
    [BibTeX] [Download PDF] 
    @inproceedings{stickel_computerclubs_2017,
address = {Wien},
title = {Computerclubs und {Flüchtlingslager} - {Ein} {Diskussionsbeitrag} zur {Forschungs}- und {Bildungsarbeit} aus praxistheoretischer {Perspektive}},
url = {https://www.degruyter.com/view/books/9783839433508/9783839433508-008/9783839433508-008.xml},
doi = {https://doi.org/10.14361/9783839433508},
booktitle = {Tagungsband {Do} it! {Yourself}? {Fragen} zu ({Forschungs}-){Praktiken} des {Selbermachens}},
author = {Stickel, Oliver and Aal, Konstantin and Schorch, Marén and Pipek, Volkmar and Hornung, Dominik and Boden, Alexander and Wulf, Volker},
year = {2017},
keywords = {CSCW, FabLab},
}

  • Stickel, O., Aal, K., Fuchsberger, V., Tscheligi, M., Rüller, S., Wenzelmann, V., Pipek, V. & Wulf, V. (2017)3D printing/digital fabrication for education and the common good Workshop for C&T2017

    Troyes
    [BibTeX] 
    @inproceedings{stickel_3d_2017,
address = {Troyes},
title = {{3D} printing/digital fabrication for education and the common good {Workshop} for {C}\&{T2017}},
booktitle = {Workshop at the 8th international conference on {Communities} and {Technologies}},
author = {Stickel, Oliver and Aal, Konstantin and Fuchsberger, Verena and Tscheligi, Manfred and Rüller, Sarah and Wenzelmann, Victoria and Pipek, Volkmar and Wulf, Volker},
year = {2017},
keywords = {CSCW, FabLab, yallah},
}

2016

  • Stickel, O. & Pipek, V. (2016)Infrastructuring & Digital Fabrication

    Klagenfurt
    [BibTeX] 
    @inproceedings{stickel_infrastructuring_2016,
address = {Klagenfurt},
title = {Infrastructuring \& {Digital} {Fabrication}},
booktitle = {{INFORMATIK} 2016},
author = {Stickel, Oliver and Pipek, Volkmar},
year = {2016},
keywords = {CSCW, FabLab},
}

  • Stickel, O. & Pipek, V. (2016)Infrastructuring & Digital Fabrication

    Klagenfurt
    [BibTeX] 
    @inproceedings{stickel_infrastructuring_2016-1,
address = {Klagenfurt},
title = {Infrastructuring \& {Digital} {Fabrication}},
booktitle = {{INFORMATIK} 2016},
author = {Stickel, Oliver and Pipek, Volkmar},
year = {2016},
keywords = {CSCW, FabLab},
}

2015

  • Stickel, O., Hornung, D., Aal, K., Rohde, M. & Wulf, V. (2015)3D Printing with Marginalized Children – An Exploration in a Palestinian Refugee Camp

    IN Boulus-Rødje, N., Ellingsen, G., Bratteteig, T., Aanestad, M. & Bjørn, P. (Eds.)., Publisher: Springer, Pages: 83–102 doi:10.1007/978-3-319-20499-4_5
    [BibTeX] [Download PDF] 
    @inproceedings{stickel_3d_2015,
title = {{3D} {Printing} with {Marginalized} {Children} - {An} {Exploration} in a {Palestinian} {Refugee} {Camp}},
url = {http://dx.doi.org/10.1007/978-3-319-20499-4_5},
doi = {10.1007/978-3-319-20499-4_5},
booktitle = {{ECSCW} 2015: {Proceedings} of the 14th {European} {Conference} on {Computer} {Supported} {Cooperative} {Work}, 19-23 {September} 2015, {Oslo}, {Norway}},
publisher = {Springer},
author = {Stickel, Oliver and Hornung, Dominik and Aal, Konstantin and Rohde, Markus and Wulf, Volker},
editor = {Boulus-Rødje, Nina and Ellingsen, Gunnar and Bratteteig, Tone and Aanestad, Margunn and Bjørn, Pernille},
year = {2015},
keywords = {CSCW, Come\_In, FabLab, yallah},
pages = {83--102},
}

  • Ludwig, T., Stickel, O., Boden, A., Pipek, V. & Wulf, V. (2015)Appropriating Digital Fabrication Technologies – A comparative study of two 3D Printing Communities

    Newport Beach, California
    [BibTeX] [Download PDF] 
    @inproceedings{ludwig_appropriating_2015,
address = {Newport Beach, California},
title = {Appropriating {Digital} {Fabrication} {Technologies} - {A} comparative study of two {3D} {Printing} {Communities}},
url = {https://www.ideals.illinois.edu/bitstream/handle/2142/73674/67_ready.pdf},
booktitle = {{iConference} 2015 {Proceedings}},
author = {Ludwig, Thomas and Stickel, Oliver and Boden, Alexander and Pipek, Volkmar and Wulf, Volker},
year = {2015},
keywords = {CSCW, FabLab},
}

  • Ludwig, T., Stickel, O., Boden, A., Pipek, V. & Wulf, V. (2015)Appropriating Digital Fabrication Technologies — A comparative study of two 3D Printing Communities

    IN iConference 2015 Proceedings
    [BibTeX] [Abstract] [Download PDF]
    yes
    @article{ludwig_appropriating_2015-1,
title = {Appropriating {Digital} {Fabrication} {Technologies} — {A} comparative study of two {3D} {Printing} {Communities}},
url = {http://hdl.handle.net/2142/73674},
abstract = {yes},
journal = {iConference 2015 Proceedings},
author = {Ludwig, Thomas and Stickel, Oliver and Boden, Alexander and Pipek, Volkmar and Wulf, Volker},
year = {2015},
keywords = {fablab, knowledge management, qualitative research methods},
}

  • Ludwig, T. & Pipek, V. (2015)Sociable Technologies for Supporting End-Users in Handling 3D Printers.

    IN International Reports on Socio-Informatics, Vol. 12 Iss. 2, Proceedings of the CHI 2015 – Workshop on End User Development in the Internet of Things Era, Vol. 12, Pages: 33–38
    [BibTeX] [Abstract]
    Recently, digital fabrication technologies such as 3D printers have become more and more common at semi-or non-professional settings, such as university or private households. Such technologies show a high complexity and the close link between hardware and software in this field pose challenges for users how to operate them. With this paper we present first steps towards Sociable Technologies, a concept that encompass hardware with an integrated appropriation infrastructure, for supporting end users in using and understanding such rising 3D printing technologies.
    @article{ludwig_sociable_2015-1,
title = {Sociable {Technologies} for {Supporting} {End}-{Users} in {Handling} {3D} {Printers}.},
volume = {12},
abstract = {Recently, digital fabrication technologies such as 3D printers have become more and more common at semi-or non-professional settings, such as university or private households. Such technologies show a high complexity and the close link between hardware and software in this field pose challenges for users how to operate them. With this paper we present first steps towards Sociable Technologies, a concept that encompass hardware with an integrated appropriation infrastructure, for supporting end users in using and understanding such rising 3D printing technologies.},
journal = {International Reports on Socio-Informatics, Vol. 12 Iss. 2, Proceedings of the CHI 2015 - Workshop on End User Development in the Internet of Things Era},
author = {Ludwig, Thomas and Pipek, Volkmar},
year = {2015},
keywords = {fablab},
pages = {33--38},
}

2014

  • Ludwig, T., Stickel, O., Boden, A. & Pipek, V. (2014)Towards sociable technologies

    New York, NY, USA, Publisher: ACM, Pages: 835–844 doi:10.1145/2598510.2598528
    [BibTeX] [Abstract] [Download PDF]
    Over the last years, digital fabrication technologies such as 3D printers have become more and more common at universities and small businesses as well as in communities of hobbyist makers. The high complexity of such technologies, the rapid technological progress and the close link between hardware and software in this field poses challenges for users and communities learning how to operate these machines, especially in the contexts of existing (and changing) practices. We present an empirical study on the appropriation of 3D printers in two different communities and derive design implications and challenges for building appropriation infrastructures to help users face those challenges and making technologies more sociable. Copyright © 2014 ACM.
    @inproceedings{ludwig_towards_2014-1,
address = {New York, NY, USA},
title = {Towards sociable technologies},
volume = {1},
isbn = {978-1-4503-2902-6},
url = {https://dl.acm.org/doi/10.1145/2598510.2598528},
doi = {10.1145/2598510.2598528},
abstract = {Over the last years, digital fabrication technologies such as 3D printers have become more and more common at universities and small businesses as well as in communities of hobbyist makers. The high complexity of such technologies, the rapid technological progress and the close link between hardware and software in this field poses challenges for users and communities learning how to operate these machines, especially in the contexts of existing (and changing) practices. We present an empirical study on the appropriation of 3D printers in two different communities and derive design implications and challenges for building appropriation infrastructures to help users face those challenges and making technologies more sociable. Copyright © 2014 ACM.},
booktitle = {Proceedings of the 2014 conference on {Designing} interactive systems},
publisher = {ACM},
author = {Ludwig, Thomas and Stickel, Oliver and Boden, Alexander and Pipek, Volkmar},
month = jun,
year = {2014},
note = {Issue: 1},
keywords = {fablab, Empirical study, Infrastructuring, 3D printing, Appropriation infrastructure, Hardware-related context, Sociable technologies, User-centered design},
pages = {835--844},
}

  • Ludwig, T., Stickel, O., Boden, A. & Pipek, V. (2014)Towards sociable technologies: an empirical study on designing appropriation infrastructures for 3D printing

    IN Wakkary, R., Harrison, S., Neustaedter, C., Bardzell, S. & Paulos, E. (Eds.)., Publisher: ACM, Pages: 835–844 doi:10.1145/2598510.2598528
    [BibTeX] [Download PDF] 
    @inproceedings{ludwig_towards_2014,
title = {Towards sociable technologies: an empirical study on designing appropriation infrastructures for {3D} printing},
isbn = {978-1-4503-2902-6},
url = {http://doi.acm.org/10.1145/2598510.2598528},
doi = {10.1145/2598510.2598528},
booktitle = {Designing {Interactive} {Systems} {Conference} 2014, {DIS} '14, {Vancouver}, {BC}, {Canada}, {June} 21-25, 2014},
publisher = {ACM},
author = {Ludwig, Thomas and Stickel, Oliver and Boden, Alexander and Pipek, Volkmar},
editor = {Wakkary, Ron and Harrison, Steve and Neustaedter, Carman and Bardzell, Shaowen and Paulos, Eric},
year = {2014},
keywords = {CSCW, FabLab},
pages = {835--844},
}

  • Stickel, O., Hornung, D., Pipek, V. & Wulf, V. (2014)Come_IN: Expanding Computer Clubs Towards Tinkering and Making


    [BibTeX] [Download PDF] 
    @inproceedings{stickel_come_in_2014,
title = {Come\_IN: {Expanding} {Computer} {Clubs} {Towards} {Tinkering} and {Making}},
url = {https://www.researchgate.net/publication/267481683_Come_IN_Expanding_Computer_Clubs_Towards_Tinkering_and_Making},
booktitle = {Workshop on "{Teaching} to {Tinker}" at {NordiCHI} 2014.},
author = {Stickel, Oliver and Hornung, Dominik and Pipek, Volkmar and Wulf, Volker},
year = {2014},
keywords = {CSCW, Come\_In, FabLab},
}

  • Aal, K., Yerousis, G., Schubert, K., Hornung, D., Stickel, O. & Wulf, V. (2014)Come_in@Palestine: Adapting a German Computer Club Concept to a Palestinian Refugee Camp

    New York, NY, USA, Publisher: ACM, Pages: 111–120 doi:10.1145/2631488.2631498
    [BibTeX] [Download PDF] 
    @inproceedings{aal_come_inpalestine_2014,
address = {New York, NY, USA},
series = {{CABS} '14},
title = {Come\_in@{Palestine}: {Adapting} a {German} {Computer} {Club} {Concept} to a {Palestinian} {Refugee} {Camp}},
isbn = {978-1-4503-2557-8},
url = {http://doi.acm.org/10.1145/2631488.2631498},
doi = {10.1145/2631488.2631498},
booktitle = {Proceedings of the 5th {ACM} {International} {Conference} on {Collaboration} {Across} {Boundaries}: {Culture}, {Distance} \& {Technology}},
publisher = {ACM},
author = {Aal, Konstantin and Yerousis, George and Schubert, Kai and Hornung, Dominik and Stickel, Oliver and Wulf, Volker},
year = {2014},
keywords = {CSCW, Come\_In, PRAXLABS, FabLab, yallah, children, computer club, communities, integration, international collaboration},
pages = {111--120},
}

  • Stickel, O., Ludwig, T. & Pipek, V. (2014)Computer im Grünen: IT-Systeme zur Unterstützung urbaner Gärten

    IN Butz, A., Koch, M. & Schlichter, J. H. (Eds.)., Publisher: De Gruyter Oldenbourg, Pages: 303–306
    [BibTeX] [Download PDF] 
    @inproceedings{stickel_computer_2014,
title = {Computer im {Grünen}: {IT}-{Systeme} zur {Unterstützung} urbaner {Gärten}},
url = {http://dl.mensch-und-computer.de/handle/123456789/3827 http://www.tholud.de/wp-content/uploads/2014/08/CSUG-MuC-2014-camera-ready.pdf},
booktitle = {Mensch \& {Computer}: {Tagungsband}},
publisher = {De Gruyter Oldenbourg},
author = {Stickel, Oliver and Ludwig, Thomas and Pipek, Volkmar},
editor = {Butz, Andreas and Koch, Michael and Schlichter, Johann H},
year = {2014},
keywords = {CSCW, FabLab},
pages = {303--306},
}

  • Ludwig, T., Stickel, O. & Pipek, V. (2014)3D Printers as Potential Boundary Negotiating Artifacts for Third Places

    Vancouver, Canada
    [BibTeX] [Download PDF] 
    @inproceedings{ludwig_3d_2014,
address = {Vancouver, Canada},
title = {{3D} {Printers} as {Potential} {Boundary} {Negotiating} {Artifacts} for {Third} {Places}},
url = {http://www.tholud.de/wp-content/uploads/2014/06/WS_ThirdPlaces-V2.pdf},
booktitle = {Workshop {Proceedings} of the {Designing} {Interactive} {Systems} {Conference} ({DIS} 2014)},
author = {Ludwig, Thomas and Stickel, Oliver and Pipek, Volkmar},
year = {2014},
keywords = {CSCW, FabLab},
}

  • von Rekowski, T., Boden, A., Stickel, O., Hornung, D. & Stevens, G. (2014)Playful, collaborative approaches to 3D modeling and 3D printing

    IN Butz, A., Koch, M. & Schlichter, J. H. (Eds.)., Publisher: De Gruyter Oldenbourg, Pages: 363–366
    [BibTeX] [Download PDF] 
    @inproceedings{von_rekowski_playful_2014,
title = {Playful, collaborative approaches to {3D} modeling and {3D} printing},
url = {http://dl.mensch-und-computer.de/handle/123456789/3845},
booktitle = {Mensch \& {Computer}: {Tagungsband}},
publisher = {De Gruyter Oldenbourg},
author = {von Rekowski, Thomas and Boden, Alexander and Stickel, Oliver and Hornung, Dominik and Stevens, Gunnar},
editor = {Butz, Andreas and Koch, Michael and Schlichter, Johann H},
year = {2014},
keywords = {CSCW, Come\_In, FabLab},
pages = {363--366},
}

  • Stickel, O. & Ludwig, T. (2014)Computer Supported Urban Gardening

    New York, NY, USA, Publisher: ACM, Pages: 77–80 doi:10.1145/2598784.2602786
    [BibTeX] [Download PDF] 
    @inproceedings{stickel_computer_2014-1,
address = {New York, NY, USA},
series = {{DIS} {Companion} '14},
title = {Computer {Supported} {Urban} {Gardening}},
isbn = {978-1-4503-2903-3},
url = {http://doi.acm.org/10.1145/2598784.2602786 http://hci-siegen.de/wp-uploads/2014/05/3-draft-urban-gardening-paper.pdf},
doi = {10.1145/2598784.2602786},
booktitle = {Proceedings of the 2014 {Companion} {Publication} on {Designing} {Interactive} {Systems}},
publisher = {ACM},
author = {Stickel, Oliver and Ludwig, Thomas},
year = {2014},
keywords = {CSCW, PRAXLABS, FabLab, diy, bottom-up culture, community building, computer supported cooperative work, information technology, maker, urban/community gardening},
pages = {77--80},
}

  • Stickel, O., Boden, A., Stevens, G., Pipek, V. & Wulf, V. (2014)Bottom-Up Kultur in Siegen: Ein Bericht über aktuelle Strukturen, Entwicklungen und Umnutzungsprozesse

    IN Diagonal, Vol. 35, Pages: 55–70 doi:10.14220/digo.2014.35.1.55
    [BibTeX] [Download PDF] 
    @article{stickel_bottom-up_2014,
title = {Bottom-{Up} {Kultur} in {Siegen}: {Ein} {Bericht} über aktuelle {Strukturen}, {Entwicklungen} und {Umnutzungsprozesse}},
volume = {35},
issn = {0938-7161},
url = {http://www.vr-elibrary.de/doi/abs/10.14220/digo.2014.35.1.55},
doi = {10.14220/digo.2014.35.1.55},
number = {1},
journal = {Diagonal},
author = {Stickel, Oliver and Boden, Alexander and Stevens, Gunnar and Pipek, Volkmar and Wulf, Volker},
year = {2014},
keywords = {CSCW, FabLab},
pages = {55--70},
}

  • Handbuch Fab Labs: Einrichtung, Finanzierung, Betrieb, Forschung & Lehre


    [BibTeX] [Abstract] [Download PDF]
    von Iris Bockermann, Jan Borchers, Anke Brocker, Marcel Lahaye, Antje Moebus, Stefan Neudecker, Oliver Stickel, Melanie Stilz, Daniel Wilkens, René Bohne, Volkmar Pipek und Heidi Schelhowe 3D-Drucker, Lasercutter, Mikrocontroller: Start-ups, Maker*innen und andere Kreative verwirklichen mit diesen Werkzeugen der digitalen Fabrikation heute eigene Produktideen. Fab Labs sind Offene Werkstätten, die erklären, wie diese Tools funktionieren. Inzwischen gibt es über 2000 Fab Labs, und ihre Zahl verdoppelt sich alle zwei Jahre, seit ein MIT-Professor sie 2001 ins Leben rief. Wir erklären, wie Sie ein Fab Lab eröffnen und erfolgreich betreiben: was Sie an Platz, Geräten und Personal brauchen, wo Sie geeignete Leute finden, wie Ihr Fab Lab nutzerfreundlich und sicher wird, was Aufbau und Betrieb kosten und woher das nötige Geld kommen kann. Hochschulen sind ideal für Fab Labs, und Sie erfahren im Detail, wie sie dort funktionieren. Viele Hinweise sind aber auch für Schulen, Firmen und Vereine genauso wertvoll. Beschreibungen erfolgreicher Fab Labs und Interviews mit den Gründer*innen zeigen, was in der Praxis funktioniert. Die Website zum Buch fab101.de bietet ergänzende Informationen. Die Autor*innen betreiben seit Jahren erfolgreiche Fab Labs an (Kunst-)Universitäten in Aachen, Bremen, Essen und Siegen, darunter das erste Fab Lab Deutschlands, und verfügen über eine einzigartige Kombination aus technischer, gestalterischer und didaktischer Expertise. 256 Seiten, Hardcore, Fadenheftung, vierfarbig, auf Munken (Lynx Rough, zartweiß)-Papier gedruckt ISBN 978-3-946496-26-7
    @misc{noauthor_handbuch_nodate,
title = {Handbuch {Fab} {Labs}: {Einrichtung}, {Finanzierung}, {Betrieb}, {Forschung} \& {Lehre}},
shorttitle = {Handbuch {Fab} {Labs}},
url = {https://www.bombini-verlag.de/shop/handbuch-fab-labs/},
abstract = {von Iris Bockermann, Jan Borchers, Anke Brocker, Marcel Lahaye, Antje Moebus, Stefan Neudecker, Oliver Stickel, Melanie Stilz, Daniel Wilkens, René Bohne, Volkmar Pipek und Heidi Schelhowe 3D-Drucker, Lasercutter, Mikrocontroller: Start-ups, Maker*innen und andere Kreative verwirklichen mit diesen Werkzeugen der digitalen Fabrikation heute eigene Produktideen. Fab Labs sind Offene Werkstätten, die erklären, wie diese Tools funktionieren. Inzwischen gibt es über 2000 Fab Labs, und ihre Zahl verdoppelt sich alle zwei Jahre, seit ein MIT-Professor sie 2001 ins Leben rief. Wir erklären, wie Sie ein Fab Lab eröffnen und erfolgreich betreiben: was Sie an Platz, Geräten und Personal brauchen, wo Sie geeignete Leute finden, wie Ihr Fab Lab nutzerfreundlich und sicher wird, was Aufbau und Betrieb kosten und woher das nötige Geld kommen kann. Hochschulen sind ideal für Fab Labs, und Sie erfahren im Detail, wie sie dort funktionieren. Viele Hinweise sind aber auch für Schulen, Firmen und Vereine genauso wertvoll. Beschreibungen erfolgreicher Fab Labs und Interviews mit den Gründer*innen zeigen, was in der Praxis funktioniert. Die Website zum Buch fab101.de bietet ergänzende Informationen. Die Autor*innen betreiben seit Jahren erfolgreiche Fab Labs an (Kunst-)Universitäten in Aachen, Bremen, Essen und Siegen, darunter das erste Fab Lab Deutschlands, und verfügen über eine einzigartige Kombination aus technischer, gestalterischer und didaktischer Expertise. 256 Seiten, Hardcore, Fadenheftung, vierfarbig, auf Munken (Lynx Rough, zartweiß)-Papier gedruckt ISBN 978-3-946496-26-7},
language = {de-DE},
urldate = {2024-02-22},
journal = {Bombini-Verlag},
keywords = {fablab},
}